Braillo 200 - 3. SERVICE AND MAINTENANCE; 3.1 Troubleshooting

BRAILLO M NORWAY AS B 200
24
6 / 8 dot braille:
ESC J n - 6 / 8 dot braille. n can be 0 or 1, 6 (0) or 8 (1) dot braille.
6 / 8 dot braille
6 / 8 dot braille ASCII HEX
6 027 074 048 1B 4A 30
8 027 074 049 1B 4A 31
Default is 6 dot braille.
Line spacing:
ESC M nn - Line Spacing. nn can be from 0 to 16 step.
Line Spacing
Step mm ASCII HEX Step mm ASCII HEX
0 0 027 077 048 048 1B 4D 30 30 9 2.8575 027 077 048 057 1B 4D 30 39
1 0.3175 027 077 048 049 1B 4D 30 31 10 3.1750 027 077 049 048 1B 4D 31 30
2 0.6350 027 077 048 050 1B 4D 30 32 11 3.4925 027 077 049 049 1B 4D 31 31
3 0.9525 027 077 048 051 1B 4D 30 33 12 3.8100 027 077 049 050 1B 4D 31 32
4 1.2700 027 077 048 052 1B 4D 30 34 13 4.1275 027 077 049 051 1B 4D 31 33
5 1.5875 027 077 048 053 1B 4D 30 35 14 4.4450 027 077 049 052 1B 4D 31 34
6 1.9050 027 077 048 054 1B 4D 30 36 15 4.7625 027 077 049 053 1B 4D 31 35
7 2.2225 027 077 048 055 1B 4D 30 37 16 5.0800 027 077 049 054 1B 4D 31 36
8 2.5400 027 077 048 056 1B 4D 30 38
Default is 16 steps. 16 steps are the standard line spacing (5.08 mm or 0.2"), 8 is the setting for “graphic”
(2.54 mm or 0.1"). Note that if the setting is less than 7, and there is text on each line, the dots might get
damaged in the printing process.
Single / Double Line Spacing:
ESC N n - Line Single/Double. N can be 0 or 1, single (0) or double line spacing (1).
Single / Double Line Spacing
Line Spacing ASCII HEX
Single 027 078 048 1B 4E 30
Double 027 078 049 1B 4E 31
Note! The function “Single or Double line spacing” will double the given line spacing. If, e.g. the current
line spacing is 13 steps (4.1275 mm), selecting Double line spacing will increase it to 26 steps
(8.255 mm).
Default is Single Line Spacing.