2 4 Power Wiring2 4 Power Wiring
The controller is supplied to operate at 11-26 VAC / VDC or 90-264VAC.Check
that the installation voltage corresponds with the power rating indicated on the
product label before connecting power to the controller.
The controller is supplied to operate at 11-26 VAC / VDC or 90-264VAC.Check
that
the installation voltage corresponds with the power rating indicated on the
product
label before connecting power to the controller.
90 264 VAC or
11 26 VAC / VDC
~
~
.KIA
Figure 2.4
Power Supply Connections
Figure 2.4
Power
Supply Connections
This equipment is designed for installation in an enclosure which provides
adequate protection against electric shock. The enclosure must be connected
to earth ground.
Local requirements regarding electrical installation should be rigidly observed.
Consideration should be given to prevent from unauthorized person access to
the power terminals.
This equipment is designed for installation in an enclosure which provides
adequate
protection against electric shock. The enclosure must be connected
to
earth ground.
Local
requirements regarding electrical installation should be rigidly observed.
Consideration
should be given to prevent from unauthorized person access to
the
power terminals.
UM25001C
23
12
34
5
8910
11
67
12
13
14
To Next Page
