UM25001C
5 10 RS-4855 10 RS-485
A making plant has 5 production lines. Each production line is equipped
with 16 units of BTC-2500 to control the temperature for the . They are
desirable to program the controllers and monitor the process in the control
room for the purpose of improving the quality and productivity. A cost effective
solution for the above application is to use 80 units of plus
a and PC based software for this
purpose.
tile
kiln
BTC-2500-XXXXX1
SNA10B Smart Network Adaptor BC-Net
A making plant has 5 production lines. Each production line is equipped
with
16 units of BTC-2500 to control the temperature for the . They are
desirable
to program the controllers and monitor the process in the control
room
for the purpose of improving the quality and productivity. A cost effective
solution
for the above application is to use 80 units of plus
a and PC
based software for this
purpose.
tile
kiln
BTC-2500-XXXXX1
SNA10B Smart Network Adaptor BC-Net
The system is installed as shown in the following diagram.The system is installed as shown in the following diagram.
Kiln 1Kiln 1
Kiln 5Kiln 5
Kiln 2Kiln 2
Kiln 3Kiln 3
Kiln 4Kiln 4
TX1
TX1
TX1
TX1 TX1
TX1 TX1
TX1
TX1
TX2
TX2
TX2
TX2 TX2
TX2 TX2
TX2
TX2
1
65
2
66
16
80
Control RoomControl Room
PC
(BC-Net)
PC
(
BC-Net )
RS-232
SNA10B
TX1TX2
Twisted-pair wire, max. distance 1 KmTwisted-pair wire, max. distance 1 Km
Figure 5.17Figure 5.17
RS-485 ApplicationsRS-485 Applications
96
Terminator, 220 ohms/0.5WTerminator, 220 ohms/0.5W
C
C C C
C C
To Next Page
