UM25001C
5 11 RS-2325 11 RS-232
Suppose a chemical experiment is performed in a laboratory. And an engineer
desires to find out the relation between the chemical reaction and temperature.
He uses a BTC-2500 to control the temperature of the solution under test. A
testing report containing the relation between the concentration and
temperature is particularly interested.
Suppose a chemical experiment is performed in a laboratory. And an engineer
desires
to find out the relation between the chemical reaction and temperature.
He
uses a BTC-2500 to control the temperature of the solution under test. A
testing
report containing the relation between the concentration and
temperature
is particularly interested.
For a single unit application it is adequate to order a with
RS-232 communication and a software. By using the BC-Net software
the temperature data can be viewed and stored in a file. The user can
program the temperature as well as other control parameters such as PID
values. He can setup the controller, down load a ramp and soak profile, also
execute the manual control or auto-tuning procedure ..... etc. The results can
be printed out or stored in a file for the future reference.
BTC-2500-xxxxx2
BC-Net
For a single unit application it is adequate to order a with
RS-232
communication and a software. By using the BC-Net software
the
temperature data can be viewed and stored in a file. The user can
program
the temperature as well as other control parameters such as PID
values.
He can setup the controller, down load a ramp and soak profile, also
execute
the manual control or auto-tuning procedure ..... etc. The results can
be
printed out or stored in a file for the future reference.
BTC-2500-xxxxx2
BC-Net
Refer to for installation and for setup procedure.Section 2-16 Section 4-8Refer to for installation and for setup procedure.Section 2-16 Section 4-8
Setup MenuSetup Menu
FUNC
COMM
PROT
ADDR
BAUD
DATA
PARI
STOP
FUNC
COMM
PROT
ADDR
BAUD
DATA
PARI
STOP
98
To Next Page
