4
6.7- Actuator, Delayed Horn Travel, Process Flow 7 - - - - - - - - - - - - - - -30
6.7.1-Wiring Table, Actuator Delayed Horn Travel, Process Flow 7 - - - - -31
6.8- Actuators, Multi-Syncro (simultaneous sonic start), Process Flow 8- - - - - -32
6.9- Interrupting Cycle for Device Position (Hold off on Horn Travel) Externally by PLC
Device, Process Flow 9- - - - - - - - - - - - - - - - - - - - - - - - - - -33
6.9.1-Wiring Table, Interrupting Cycle for Device Position, Process Flow 9 - -34
6.10- Custom Actuator, Process Flow 10- - - - - - - - - - - - - - - - - - - - -35
6.11- Converter Stack, Standard Automation, Process Flow 11 - - - - - - - - - -36
6.11.1-Wiring Table, Converter Stack, Standard Automation, Process Flow 11 -
37
6.11.2-2000 Series Automation, Process Flow 11 (Requires Jumper 100-246-
1178) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -38
6.12- Converter Stack, External Preset Select, Process Flow 12 - - - - - - - - -39
6.12.1-Wiring Table, Converter Stack, External Preset Select, Process Flow 12
40
7.0- Frequently Asked Questions (FAQ) - - - - - - - - - - - - - - - - - - - - - -41
8.0- Glossary V9.xx - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -46
To Next Page
Loading...
