8
en
► Wipe the shell of the product with a lint-free cloth moistened with a
commercial disinfectant for wipe disinfection.
► If necessary, after the appropriate exposure time, wipe off any residues
of the cleaning/disinfecting agent with a lint-free cloth moistened
with clean water.
► Dry the product with a clean, lint-free cloth.
► Clean the contacts in the charging bay with isopropanol or ethyl alco-
hol and a cotton swab. Do not use corrosive chemicals.
► If necessary, repeat the cleaning/disinfecting process.
6.2 Inspection and checking
► Allow the product to cool down to room temperature.
► Inspect the product after each cleaning and disinfecting cycle to be
sure it is: clean, functional, and undamaged.
► Check the product for any damage, abnormal running noise, overheat-
ing or excessive vibration.
► Inspect the shearing head for broken, damaged or blunt cutting edges.
► Set aside the product if it is damaged.
7. Maintenance
To ensure reliable operation, Aesculap recommends servicing the product
at least once a year.
CAUTION
Damage to the product due to inap-
propriate cleaning/disinfecting
agents!
► Only use cleaning/disinfecting
agents approved for surface clean-
ing. Follow the manufacturer’s
instructions for the respective
cleaning/disinfecting agent.
► Never immerse the product in water
or detergent.
► Do not introduce any fluid into the
charging bays.
► Clean the contacts in the charging
bay, applying extreme care.
To Next Page
Loading...
Need help?
General
