10
E. Press either the Hot, Ambient, or Cold button on the Touch Panel until water is flowing steadily, and any air
is removed from the tanks.
F. Turn on the green Cold Water Switch (7) and red Hot-Water Switch (8) on back of the dispenser.
NOTE: It takes approximately 15 minutes for the cold water to reach its optimal temperature and
approximately 90 minutes for the hot water to reach its optimal temperature.
Using the Dispenser
1. Adjusting Time
A. Simultaneously press the Up Arrow and the Down Arrow for 3 seconds. The digital screen will flash.
B. To adjust hours, briefly press the Hot Water button. Now just the hours will flash. Press either the Up or
Down Arrow until the desired hour is reached. The range is 01 to 12.
C. To adjust minutes, briefly press the Cold Water button. Now just the minutes will flash. Press either the Up
or Down Arrow until the desired minutes are reached. The range is 00 to 59.
D. After the desired time is set, briefly touch the Unlock button. The digital screen will stop flashing and
the time will be displayed.
2. Adjusting Cold Water Temperature
A. Simultaneously press the Unlock and Cold Water buttons for 3 seconds. The digital screen will flash,
displaying the current cold water temperature.
B. Using the Up or Down Arrows, adjust to the desired temperature. Temperature adjusts by 2-degree
increments. Adjustable range is 39 °F to 59 °F (4 °C to 15 °C).
NOTE: Cold water temperature is measured inside cold reservoir tank. Due to many variables, including
but not limited to, ambient temperature, water receptacle size/temperature, internal travel from
reservoir tank to dispense point, etc., temperature of water dispensed from unit will vary.
C. Once you’ve selected your desired temperature, briefly press the Unlock button to set the temperature
and exit the adjustment state.
Touch Panel Description
1. Up arrow – used to set time and temperature.
2. Clock/Temperature display
3. Down arrow – used to set time and temperature.
4. PCB icon – filter-life reminder function
5. Unlock button – press to unlock hot water button.
6. Hot water button – will illuminate when selected.
7. Ambient water button – will illuminate when selected.
8. Cold water button – will illuminate when selected.
2
1
4
5
6
7
3
8
To Next Page
Loading...
Need help?
General
