Broadcom Brocade G620 - Page 52

53-1003990-22 Installation Guide Brocade
®
G620 Switch Hardware Installation Guide
Command Description
historyShow Displays the device history
psShow Displays power supply status and information
switchShow Displays switch status and information
tempShow Displays temperature status and information
The switchShow command provides the following information about the device and port status.
EG620_192:admin> switchshow
switchName: EG620_192
switchType: 183.0
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 192
switchId: fffcc0
switchWwn: 10:00:d9:1f:cd:05:56:e1
zoning: ON (fos6k)
switchBeacon: OFF
FC Router: OFF
Fabric Name: FID1
HIF Mode: OFF
LS Attribute: [Inherited FID: 1]
Index Port Address Media Speed State Proto
==================================================
0 0 c00000 id N16 No_Light FC
(output truncated)
40 40 c02800 id N16 Online FC E-Port (Trunk port, master is Port 42 )
41 41 c02900 id N16 Laser_Flt FC
42 42 c02a00 id N16 Online FC E-Port 10:00:00:05:1e:f6:58:01
"CGEN5_8__114017_LS1" (Trunk master)
43 43 c02b00 id N16 Online FC E-Port (Trunk port, master is Port 42 )
44 44 c02c00 id N16 Online FC E-Port (Trunk port, master is Port 47 )
45 45 c02d00 id N16 Online FC E-Port (Trunk port, master is Port 47 )
(output truncated)
The tempshow command shows the current temperature of the EM sensors.
switch:admin> tempshow
Sensor ID|Sensor Index|State |Centigrade |Fahrenheit |
-------------------------------------------------------------
1 |0 |Ok |30 |86 |
2 |1 |Ok |34 |93 |
3 |2 |Ok |29 |84 |
4 |3 |Ok |30 |86 |
5 |4 |Ok |30 |86 |
6 |5 |Ok |32 |89 |
(output truncated)
53-1003990-22
52