53-1003990-22 Installation Guide
Brocade
®
G620 Switch Hardware Installation Guide
Table 4: Brocade G620 Switch Operating in FOS 8.0.0 and 9.0.0
Hardware G620 G620v2
Switch type 162
183
Minimum FOS level 8.0.0 9.0.0
Number of LEDs per
QSFP port
4 LEDs per QSFP port (that is, 1 LED per QSFP
channel)
(Port status LEDs for QSFP ports behave the
same as for SFP+ ports)
1 LED per QSFP port (that is, 1 LED per 4 channels
of QSFP). For details, see QSFP Port Status LEDs.
Console port RJ-45 Mini-USB
Notes, Cautions, and Danger Notices
Notes, cautions, and danger statements may be used in this document.
NOTE
A Note provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related
information.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause damage to
hardware, firmware, software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to
you. Safety labels are also attached directly to products to warn of these conditions or situations.
Contacting Technical Support for Your Brocade
®
Product
If you purchased Brocade
®
product support from a Broadcom
®
OEM or solution provider, contact your OEM or solution
provider for all your product support needs.
•
OEM and solution providers are trained and certified by Broadcom to support Brocade products.
•
Broadcom provides backline support for issues that cannot be resolved by the OEM or solution provider.
•
Brocade Supplemental Support augments your existing OEM support contract, providing direct access to Brocade
expertise. For more information on this option, contact Broadcom or your OEM.
•
For questions regarding service levels and response times, contact your OEM or solution provider.
53-1003990-22
7
To Next Page
Loading...
