Brocade FastIron WS Hardware Installation Guide 11
53-1002188-01
Installation precautions
2
DRAFT: BROCADE CONFIDENTIAL
Do not install the device in an environment where the operating ambient temperature might
exceed 40
o
C (104
o
F).
Make sure the air flow around the front and sides of the device is not restricted.
Never leave tools inside the device.
Lifting precautions
Make sure the rack or cabinet housing the device is adequately secured to prevent it from
becoming unstable or falling over.
Mount the devices you install in a rack or cabinet as low as possible. Place the heaviest device at
the bottom and progressively place lighter devices above.
Power precautions
Use a separate branch circuit for each AC power cord, which provides redundancy in case one of
the circuits fails.
To avoid high voltage shock, do not open the device while the power is on.
To Next Page
Loading...
Need help?
General
