2-2
3. Keep operator's compartment and decks free of mud and grease.
4. If crane is equipped with a cab, keep all window glass clean. Keep gauges clean.
5. Tools, lubricants, or rags on the crane should be kept in a secured toolbox.
6. Do not use ether for starting. Ether is highly flammable and can be ignited by the intake
manifold heater grid, causing engine damage or operator injury.
7. 8.
9. The Rated Capacity Limiter must be checked before each shift and after each setup for the
proper operating configuration on the display. It must be inspected before each shift and
tested with a known load at least once a month as described in the RCL operation manual.
To Next Page
Loading...
