2-6
22. Crane has four lifting rings, one at each corner of load deck, for lifting the crane. Use
proper slings and rigging methods to keep the load balanced during the lift. Do not lift by
the boom. Proper lifting and securing practices are the responsibility of the rigger in
charge.
23. When transporting the crane, be sure it is properly secured to the vehicle. Utilize the tie-
down anchors as indicated on the crane to stabilize the load and prevent shifting during
transport. Use caution to not over-tighten the chains and binders when securing the crane
to the transport vehicle. Proper securement and prudent shipping practices are the
responsibility of the carrier.
To Next Page
Loading...
