BRONKHORST EL-FLOW Select Series - Software (DDE Applications); Digital Fieldbus Operation (RS485)

Bronkhorst®
Instruction Manual EL-FLOW® Select 9.17.099F30
When not using FlowDDE for communication with the
instrument, parameters are addressed by:
· Node address of the instrument
· Process number on the instrument
· Parameter number on the instrument
See section Digital parameters for more information about
instrument parameters.
For more information about FlowDDE, including setting up a DDE link, consult the FlowDDE Manual (document no.
9.17.067) or the help file in the application.
3.6.2.2 Software (DDE applications)
Examples of free Bronkhorst® DDE client applications: FlowPlot and FlowView. Other software programs (third party)
supporting DDE are for example MS-Office, LabVIEW, InTouch and Wizcon.
Bronkhorst® software applications 'FlowView' (left) and 'FlowPlot' (right)
FlowDDE and other Bronkhorst® applications are available on the support CD or can be downloaded from the product
pages on the Bronkhorst website: www.bronkhorst.com/products
3.6.3 Digital fieldbus operation (RS485)
The following optional fieldbuses are available for EL-FLOW® Select instruments. For all mentioned fieldbus systems, except
FLOW-BUS, instruments act as slaves on the master/slave bus system. There is no mutual communication between slaves,
only between master and slave.