BRONKHORST EL-FLOW Select Series - Documentation; Model key

Bronkhorst®
Instruction Manual EL-FLOW® Select9.17.099F 9
1.6 Documentation
The EL-FLOW® Select comes with all necessary documentation for basic operation and maintenance. Some parts of this
manual refer to other documents, most of which can be downloaded from the Bronkhorst website. Calibration certificates,
test certificates and material certificates are included in the scope of delivery or can be provided on request.
The documentation listed in the following table is available on the EL-FLOW® Select product pages under
www.bronkhorst.com/products :
Type
Document name
Document no.
Brochures
EL-FLOW® Select Brochure
9.60.006
Metal Sealed Brochure
9.60.013
Manuals
Instruction Manual EL-FLOW® Select (this document)
9.17.099
Quick Installation Guide EL-FLOW® Select
9.17.098
Technical documentation
Hook-up diagram Analog/RS232
9.16.119
Hook-up diagram CANopen
9.16.217
Hook-up diagram DeviceNet™
9.16.122
Hook-up diagram EtherCAT®
9.16.124
Hook-up diagram FLOW-BUS
9.16.120
Hook-up diagram Modbus
9.16.123
Hook-up diagram PROFIBUS DP
9.16.121
Hook-up diagram PROFINET
9.16.147
Hook-up diagram custom bus & I/O configurations
9.16.118
Dimensional drawings
model specific
The documentation listed in the following table can be downloaded from www.bronkhorst.com/downloads :
Type
Document
Document no.
General documentation
EU Declaration of Conformity
9.06.021
Instruction manuals
Manual CANopen interface
9.17.131
Manual DeviceNet™ interface
9.17.026
Manual EtherCAT® interface
9.17.063
Manual FLOW-BUS interface
9.17.024
Manual Modbus interface
9.17.035
Manual PROFIBUS DP interface
9.17.025
Manual PROFINET interface
9.17.095
Manual RS232 interface
9.17.027
1.7 Model key
The model key on the serial number label contains information about the technical properties of the instrument as ordered.
The specific properties can be retrieved with the diagrams below.