IMPORTANT
IMPORTANTIMPORTANT
IMPORTANT!!!
!!!!!!
!!!
Where metal flue pipes are used, it is essential that they are appropriately insulated (insulated fibre cladding)
Where metal flue pipes are used, it is essential that they are appropriately insulated (insulated fibre cladding) Where metal flue pipes are used, it is essential that they are appropriately insulated (insulated fibre cladding)
Where metal flue pipes are used, it is essential that they are appropriately insulated (insulated fibre cladding)
to avoid damaging the masonry in the chimney. When the device
to avoid damaging the masonry in the chimney. When the deviceto avoid damaging the masonry in the chimney. When the device
to avoid damaging the masonry in the chimney. When the device
is being installed in an existing chimney, it
is being installed in an existing chimney, it is being installed in an existing chimney, it
is being installed in an existing chimney, it
must be sealed around the flue pipe exit at the bottom entrance to the chimney with a pre
must be sealed around the flue pipe exit at the bottom entrance to the chimney with a premust be sealed around the flue pipe exit at the bottom entrance to the chimney with a pre
must be sealed around the flue pipe exit at the bottom entrance to the chimney with a pre-
--
-formed metal plate
formed metal plate formed metal plate
formed metal plate
or other fireproof material able to withstand very high temperatures
or other fireproof material able to withstand very high temperaturesor other fireproof material able to withstand very high temperatures
or other fireproof material able to withstand very high temperatures.
..
.
References Flammable Objects Not flammable objects
A 1500 800
B 1500 150
C 1500 400
5.6
5.65.6
5.6
Outside air
Outside air Outside air
Outside air intake
intakeintake
intake
It is essential that the room in which the device is installed has sufficient fresh air intake and air circulation to
keep a good draw on the fire and to re-oxygenate the room even with the doors and windows closed.
• The air inlet must be positioned so that it cannot be obstructed.
The air inlet must be positioned so that it cannot be obstructed.The air inlet must be positioned so that it cannot be obstructed.
The air inlet must be positioned so that it cannot be obstructed.
• It must take fresh air directly into the room where the device is installed, be protected by grille
It must take fresh air directly into the room where the device is installed, be protected by grille It must take fresh air directly into the room where the device is installed, be protected by grille
It must take fresh air directly into the room where the device is installed, be protected by grille
and have an area of at least 100 cm2.
and have an area of at least 100 cm2.and have an area of at least 100 cm2.
and have an area of at least 100 cm2.
• Air inlets should
Air inlets shouldAir inlets should
Air inlets shouldn’t draw air from adjacent rooms such as garages, lavatories, boiler rooms, etc,
n’t draw air from adjacent rooms such as garages, lavatories, boiler rooms, etc, n’t draw air from adjacent rooms such as garages, lavatories, boiler rooms, etc,
n’t draw air from adjacent rooms such as garages, lavatories, boiler rooms, etc,
but should take air directly from outside the building
but should take air directly from outside the buildingbut should take air directly from outside the building
but should take air directly from outside the building
To Next Page
Loading...