9.4.6
Menu 5. Stand-by mode
If you activate this option, the stove will shut down when it reaches the consigned temperature + a 4º C
differential previously introduced into the display. When the room temperature falls below the consigned
temperature – a 4º C differential, the stove carries out again an automatic starting cycle.
In case this function remains deactivated, and also from factory comes in mode “off”, when the stove reaches
the consigned temperature, it will always remain on “modulation working”, being able to overcome the
dependence, the value of the established consigned temperature.
9.4.7
Menu 6- Sonorous mode
When this mode is activated, the stove emit a sound if any anomaly is detected, getting into the alarm stage.
9.4.8
Menu 7. Initial charge
Con la estufa apagada y fría podemos efectuar una precarga de pellet durante un tiempo máximo de 90”.
Para iniciar la carga pulse la tecla 1 y para interrumpirla pulse la tecla 4.
9.4.9
Menu 8- Stove stage
It visualizes the current stage of the stove and informs about the connected devices stage.
To Next Page
Loading...