Bronpi Princesa - Installation Requirements; Safety Control Measures

6
Volume
max. warning (m3)
237 237 237 237 237
Nominal
power c
apacity
87 87 87 87 87
R
educed power
capacity
90 90 90 90 90
Global thermal power max. (Kw.)
10,5 10,5 10,5 10,5 10,5
Useful thermal power max. (Kw)
9.5 9.5 9.5 9.5 9.5
Useful thermal power min. (Kw)
4.5 4.5 4.5 4.5 4.5
Pellet c
onsumption
mi
n.
Kg/h
0.9 0.9 0.9 0.9 0.9
Pellet c
onsumption m
a
x. Kg/h
2.1 2.1 2.1 2.1 2.1
Hopper c
apacity (Kg.)
21 21 21 21 21
Autonomy
min/ma
x (h)
23/10 23/10 23/10 23/10 23/10
Recommend shot to useful power max.
(Pa)
~ 12 ~ 12 ~ 12 ~ 12 ~ 12
Recommend shot to usef
ul power min.
(Pa)
~ 10 ~ 10 ~ 10 ~ 10 ~ 10
Electrical consumption (W)
150-200
150-200
150-200
150-200
150-200
Electrical consumption during the
ignition (W)
300 300 300 300 300
Cast iron interior
Yes
Yes Yes Yes Yes
Autom
atic ignition
Yes
Yes Yes Yes Yes
Security pellet thermostat
Yes
Yes Yes Yes Yes
Remote control
Yes
Yes Yes Yes Yes
Weekly programmer
Yes
Yes Yes Yes Yes
5
55
5 INSTALLATION REQUIREMENTS
INSTALLATION REQUIREMENTSINSTALLATION REQUIREMENTS
INSTALLATION REQUIREMENTS
The way to install a new product is directly related to the safety and efficiency of the appliance. This is the
reason why all stoves and appliances should always be installed only by suitable trained and qualified heating
engineers. Serious damages to the appliance, as well as personal injuries, may occur if the device is installed
incorrectly.
Prior to installation, the following measures must be taken:
• Check the floor is strong enough to support the weight of the unit, and if it is made of
flammable materials (wood, etc) or susceptible materials to high temperatures.
• Make sure the ambience where the device will be installed has suitable ventilation (presence of
air capture).
• Avoid installation in rooms with shared ventilation vents, hoods (with or without extractors),
type B gas appliances, gas bottles or other appliances which use may affect the draw to the
appliance
• Make sure the chimney and the flue system/flue liner used is accurate for the product.
• Make sure each appliance has it own chimney. The same chimney can not be used for more
than one appliance.
We suggest contacting your chimney sweep to check whether chimney connexion and the combustion air
flow on the installation place.
5.1. Safety
5.1. Safety5.1. Safety
5.1. Safety control
controlcontrol
control measures
measuresmeasures
measures
During the appliance installation, for certain risks it is necessary to bear in mind the following safety measures: