9.5.6
Shutdown stove
For shutting down the stove you just have to press the key nº
4
for a few seconds. Once the stove is turned
off, the stove starts the final cleaning phase, in which the pellet feeder stops and the smoke extractor is
operating with the maximum speed. This cleaning phase will do not finish until the stove reaches the accurate
cooling temperature.
9.5.7
Shutted off stove
In the picture 22 is shown the information on the screen when the stove is shutted down.
Fig.22
9.5.8
Re-starting up stove
Once the stove is turned off, it will not be able to start it up again until a safety time has passed and the stove
is cool enough. If you try to start up the stove, on the screen will appear a message as shown on the picture nº
23
Fig. 23
9.6
9.69.6
9.6
What happens if
What happens ifWhat happens if
What happens if…?
…?…?
…?
9.6.1
Pellet fuel do not light
In case of starting up failure, a message will appear on the display screen as shown on the picture
24.
To Next Page
Loading...