Bronpi Princesa - Alarm Starting up Failure; Alarm Shutdown During Work Phase; Alarm Damaged Extraction Smokes Fan

To Next Page

To Previous Page

Fig. 25

During this alarm phase, the stove will execute the shutting down procedure.

9.7.3

Alarm starting up failure

It happens when the starting up phase is not properly executed. On the display screen a message like in the

nº

26 Picture

will be shown, and the shutting down procedure immediately activated.

Fig. 26

9.7.4

Alarm shutdown during work phase

If the flame gets shut down along the working phase, and the smoke temperature decrease below the

established minimal, an alarm as shown in the nº 27 Picture will happen, and the shutting down procedure

will immediately be activated.

Fig. 27

9.7.5

Alarm damaged extraction smokes fan

It happens when the smoke extraction fan is broken down. If this takes place, the stove shuts down and an

alarm advice appears on the display screen as in the nº 28 Picture.

ALARM

TEMP. SMOKE

STARTING UP

FAILURE

ALARM

NO FIRE

ASPIRATION

FAILURE