9
If a section of the chimney is too large to be heated adequately, this will cause problems with the appliance: to
avoid this we recommend installing a flue pipe for the
we recommend installing a flue pipe for the we recommend installing a flue pipe for the
we recommend installing a flue pipe for the entire length of the chimney
entire length of the chimneyentire length of the chimney
entire length of the chimney.
..
.
If any section of the chimney is constructed, it will reduce the draw on the fire.
The flue pipe must be installed an adequate distance from any flammable material and have correct insulation
The flue pipe must be installed an adequate distance from any flammable material and have correct insulation The flue pipe must be installed an adequate distance from any flammable material and have correct insulation
The flue pipe must be installed an adequate distance from any flammable material and have correct insulation
or a sufficient air gap. Flue pipe
or a sufficient air gap. Flue pipeor a sufficient air gap. Flue pipe
or a sufficient air gap. Flue pipes must never be installed inside air ventilation channels.
s must never be installed inside air ventilation channels.s must never be installed inside air ventilation channels.
s must never be installed inside air ventilation channels. Moveable or fixed
openings must not be made in the chimney for the connection of any other device.
See DP2, DP3 and DP4
See DP2, DP3 and DP4See DP2, DP3 and DP4
See DP2, DP3 and DP4.
..
.
To Next Page
Loading...