Brother 8085DN - DCP B/W Laser - Page 132

Firewall settings (For Network users)
124
7
d Click the Exceptions tab.
e Click the Add port... button.
f To add port 54925 for network scanning, enter the information below:
1In Name: Enter any description, for example “Brother Scanner”.
2In Port number: Enter “54925”.
3Make sure UDP is selected.
Then, click OK.
g Click the Add port... button.
h To add port 54926 for Network PC-Fax, enter the information below:
1In Name: Enter any description, for example “Brother PC-Fax“.
2In Port number: Enter “54926”.
3Make sure UDP is selected.
Then, click OK.