Brother 8085DN - DCP B/W Laser User Manual

Network Scanning
207
11
Scan to OCR 11
When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh you
designated on your network. ControlCenter2 will activate Presto! PageManager and convert your document
into text for viewing and editing from a word processing application on the designated PC. You can change
the Scan configuration. (See OCR (word processing application) on page 185.)
a Load your document.
b Press (Scan).
c Press a or b to choose Scan to PC.
Press OK.
d Press a or b to choose OCR.
Press OK.
If your machine does not support Duplex Scan, go to step f.
If your machine supports Duplex Scan, go to step e.
e Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
f Press a or b to choose the destination Macintosh you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination Macintosh
on the control panel.
Press OK.
g Press Start.
The machine starts the scanning process.
Note
The Scan to OCR function is available for English, French, German, Dutch, Italian, Spanish, Portuguese,
Danish, Swedish, Japanese and Chinese.

Brother 8085DN - DCP B/W Laser Specifications

General

Printer Type	Laser
Functions	Print, Copy, Scan
Duplex Printing	Yes
Copy Resolution	Up to 600 x 600 dpi
Scanner Type	Flatbed, ADF
Memory	32 MB
Operating System Compatibility	Windows, Mac, Linux
Scan Resolution	Up to 19200 x 19200 dpi (interpolated)
Paper Capacity	250 sheets
Connectivity	Ethernet