Brother 8085DN - DCP B/W Laser User Manual

164
9
9
Scanning from a Macintosh 9
The Brother machine software includes a TWAIN Scanner driver for Macintosh. You can use this Macintosh
TWAIN Scanner driver with any applications that support TWAIN specifications.
Note
If you want to scan from a machine on a network, choose the networked machine in the Device Selector
application located in Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the
Model pop-up menu of ControlCenter2.
Run your Macintosh TWAIN-compliant application. The first time you use the Brother TWAIN driver, set it as
the default driver by choosing Select Source. For each document you scan after this, choose
Acquire Image Data or Start. The menu option that lets you choose the Scanner driver may vary depending
on your application.
Note
The method of choosing the default driver or scanning a document may vary depending on the application
you are using.
Scanning an image into your Macintosh 9
You can scan a whole page, or scan a portion after pre-scanning the document.
Scanning a whole page 9
a Load your document.
b Adjust the following settings, if needed, in the Scanner Setup dialog box:
 Resolution
 Scan Type
 Document Size
Scanning 9

Brother 8085DN - DCP B/W Laser Specifications

General

Printer Type	Laser
Functions	Print, Copy, Scan
Duplex Printing	Yes
Copy Resolution	Up to 600 x 600 dpi
Scanner Type	Flatbed, ADF
Memory	32 MB
Operating System Compatibility	Windows, Mac, Linux
Scan Resolution	Up to 19200 x 19200 dpi (interpolated)
Paper Capacity	250 sheets
Connectivity	Ethernet