12
Connecting the printer
Connect the printer to the power source and a computer.
Connecting to the power
source
1
Connect the included power supply cord
to the AC adapter.
2
Insert the AC adapter connector into the
AC adapter socket on the back of the
printer.
3
Plug the power supply cord into an
electrical outlet (AC 220 to 240 V).
4
Turning on the printer
Turn on the main power switch on the
back of the printer, and then press the
power button on the front of the printer.
Turning off the printer
Hold down the power button on the front
of the printer until the printer is turned off,
and then turn off the main power switch
on the back of the printer.
DC IN 24V
DC IN 24V
Note
O Always turn the power off first using the
power button on the front of the printer
before removing the AC adapter or
turning off the main power switch.
O After using the printer, disconnect the
power supply cord from the electrical
outlet and the AC adapter from the printer
and store them for future use.
O When removing the AC adapter always
pull the plug. Do not pull the AC adapter
or power supply cord. The wire in the
cords may break.
O Do not use any AC adapter other than the
one included with the printer. Failure to
observe this may result in an accident.
STATUS
STATUS
Power
button
Main power
switch
To Next Page
Loading...
Need help?
General
