Brother 97OOPC - BTP Function Steps

49
ENGLISH
List of bar codes for specifying settings
These are the bar codes for specifying settings used with the “BTP (Bar code Template Print) function”
(→ P.35).
Note
O When using the bar codes in this list, set “Trigger for P-touch Template Printing” and “Command
Prefix Character” to default in P-touch Template Settings.
QP-touch template command (Initialize + begin specifying settings)
QBasic settings
• Auto cut on*
1
• Auto cut off
• Half cut on*
1
• Half cut off
• Chain printing on • Chain printing off*
1
• Mirror printing on • Mirror printing off*
1
• Number of copies*
2