22
QFor network interface cable users
6
Choose “Search the network for devices
and choose from a list of discovered
devices (Recommended).” Or enter your
printer’s IP address or its node name.
Click [Next].
You can find your printer’s IP address and
the node name by printing out the printer
settings page. For details, refer to “Printing
the printer settings” (→ P.41).
7
Choose your printer.
Follow the on-screen instructions.
8
When instructed to register your printer
online, select a registration method and
click [Next].
If you have selected to register the product
online, your default internet browser will
be launched in a new window. Follow the
instructions to register your printer.
9
When instructed to download the
optional tools, select your choice and
click [Next].
• If you choose “Yes, display the page”,
you will go to the Brother Solutions
Center web site before finishing the
installation (recommended).
Choose your region (eg. Asia/Oceania),
your country, your model and
Downloads for your model.
• If you choose “No, do not display the
page”, you will continue the installation.
0
Click [Finish].
The software installation is now
completed.
Restart your computer if you are
instructed to do so.
a
Start the software.
Click “Start” - “All Programs (Programs)” -
“Brother P-touch” - “P-touch Editor 5.0”
to start P-touch Editor 5.0.
QFor shared network printer users
6
Choose your printer’s queue, and then
click [OK].
Follow the on-screen instructions.
7
When instructed to register your printer
online, select a registration method and
click [Next].
If you have selected to register the
product online, your default internet
browser will be launched in a new
window. Follow the instructions to
register your printer.
8
When instructed to download the
optional tools, select your choice and
click [Next].
• If you choose “Yes, display the page”,
you will go to the Brother Solutions
Center web site before finishing the
installation (recommended).
Choose your region (eg. Asia/Oceania),
your country, your model and
Downloads for your model.
• If you choose “No, do not display the
page”, you will continue the
installation.
9
Click [Finish].
The software installation is now
completed.
Restart your computer if you are
instructed to do so.
0
Start the software.
Click “Start” - “All Programs (Programs)” -
“Brother P-touch” - “P-touch Editor 5.0”
to start P-touch Editor 5.0.
Note
O To download the optional tools later, you
can find them on this Web site:
http://solutions.brother.com/
Choose your region (eg. Asia/Oceania),
your country, your model and
Downloads for your model.
Note
O Contact your administrator if you do not
know the location or the name of the
printer in the network.
Note
O To download the optional tools later, you
can find them on this Web site:
http://solutions.brother.com/
Choose your region (eg. Asia/Oceania),
your country, your model and
Downloads for your model.
To Next Page
Loading...
Need help?
General
