Brother BAS-415 - Page 33

<Y·diredion>
[ENTER] [EDIT] (COMMUNICATE]
[START(sewi ng)]
<DSYNCH ®Ov- TRVL
ROM J-Ver. MO, SO
ROM K-Ver.4
<D+X ®-X ®+Y @-Y
<D+X ®-X ~+Y @-Y
t--~-~ED_E~_No_. ----~[]~ 8][5] rpm.
<D+X ®-X ®+Y @-Y
1) Press the numeric key <0> in the main menu.
2) Press the < 2 > key to select ®Ov- TRVL.
3) Press the <3> key. The hoop and the holder base
move 143.5 mm toward the operator. The figure
"143.5" is displayed on the panel and the cursor
appears under
the number®.
4) Loosen two bolts. Adjust sensor bracket A
position
so that the thread sensor indicator lights
with the figure on the display between 143.0 mm
-
144.0 mm when < f > or < J, > is pressed.
(143.5
mm desireble)
5) Press the <END> key.
-30-
From the library of: Superior Sewing Machine & Supply LLC