Brother DCP-7060D Service Manual

Confidential
CHAPTER 4 ADJUSTMENTS AND UPDATING OF SETTINGS,
REQUIRED AFTER PARTS REPLACEMENT
This chapter describes adjustments and updating of settings, which are required if the main
PCB ASSY and some other parts have been replaced. This chapter also covers how to
update the firmware.
CONTENTS
1. IF YOU REPLACE THE MAIN PCB ASSY................................................................... 4-1
1.1 Rewriting the firmware (Sub firmware, Main firmware)..........................................4-2
1.1.1 Checking firmware version .........................................................................4-2
1.1.2 Rewriting the firmware using computer ......................................................4-2
1.2 Initialization of EEPROM of Main PCB ASSY (Maintenance Mode: Code 01)......4-3
1.3 Setting by Country (Maintenance Mode: Code 74) ............................................... 4-3
1.4 Setting the Serial Number .....................................................................................4-3
1.5 Inputting the Adjusted Value of the Laser Unit ......................................................4-5
1.6 Acquisition of White Level Data (Maintenance Mode: Code 55) ...........................4-9
1.7 Operation Check of Sensors (Maintenance Mode: Code 32)................................4-9
2. IF YOU REPLACE THE LASER UNIT........................................................................4-10
2.1 Inputting the Adjusted Value of the Laser Unit ....................................................4-10
3. IF YOU REPLACE THE LOW VOLTAGE POWER SUPPLY PCB ASSY ..................4-14
3.1 Reset of Irregular Power Supply Detection Counter............................................4-14
4. IF YOU REPLACE THE DOCUMENT SCANNER UNIT / THE CIS UNIT.................. 4-15
4.1 Acquisition of White Level Data (Maintenance Mode: Code 55) .........................4-15
4.2 Scanning and Printing Check .............................................................................. 4-15
4.3 Placement of Scanner Unit in Position for Transportation
(Maintenance Mode: Code 06) ............................................................................4-15
5. IF YOU REPLACE THE PANEL UNIT ........................................................................ 4-15
5.1 Operation Check of LCD (Maintenance Mode: Code 12).................................... 4-15
5.2 Operation Check of Control Panel Button (Maintenance Mode: Code 13)..........4-15
6. IF YOU REPLACE THE LCD UNIT............................................................................. 4-16
6.1 Operation Check of LCD (Maintenance Mode: Code 12).................................... 4-16

Brother DCP-7060D Specifications

General

Dimensions (WxDxH)	405 x 399 x 268 mm
All-in-one functions	Copy, Print, Scan
Color all-in-one functions	Scan
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Economical printing	Yes
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	24 ppm
Duplex print speed (black, normal quality, A4/US Letter)	5 ppm
Digital sender	No
Maximum duty cycle	- pages per month
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	11 s
Copy speed (black, normal quality, A4)	24 cpm
Scan to	E-mail, Image, OCR
Scanner type	Flatbed scanner
Grayscale levels	256
Input color depth	48 bit
Output color depth	24 bit
Scan speed (black)	2.63 ppm
Image formats supported	BMP, JPG, TIF
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	600 x 2400 DPI
Total input capacity	250 sheets
Total output capacity	100 sheets
Multi-Purpose tray input capacity	1 sheets
Custom media width	76.2 - 216 mm
Maximum print size	216 x 406 mm
Custom media length	116 - 406.4 mm
Paper tray media types	Bond paper, Plain paper, Recycled paper
Paper tray media weight	60 - 105 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Plain paper, Recycled paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Display	LCD
Market positioning	Home & office
Display number of lines	2 lines
Display number of characters	16
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Processor family	ARM
Sound power level (standby)	30 dB
Sound pressure level (printing)	53 dB
AC input frequency	50 - 60 Hz
Power consumption (standby)	55 W
Power consumption (PowerSave)	0.9 W
Power consumption (average operating)	445 W
Sustainability certificates	ENERGY STAR
Package weight	13.200 g
Mac operating systems supported	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard
Windows operating systems supported	Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64