Brother DCP-7060D - 1.2 Initialization of EEPROM of Main PCB ASSY (Maintenance Mode: Code 01); 1.3 Setting by Country (Maintenance Mode: Code 74); 1.4 Setting the Serial Number

4-3 Confidential
1.2 Initialization of EEPROM of Main PCB ASSY (Maintenance Mode: Code 01)
Initialize the EEPROM in accordance with "1.4.1 EEPROM parameter initialization (Function
code 01, 91)"
in Chapter 5.
1.3 Setting by Country (Maintenance Mode: Code 74)
Make appropriate settings by country in accordance with "1.4.19 Setting by country (Function
code 74)" in Chapter 5.
1.4 Setting the Serial Number
<Procedures>
(1) Connect the PC and machine with the USB cable.
(2) Double-click the brusbsn.exe file which has been copied in the BLL folder to start.
(3) Click the Laser 10Model.
(4) In Port on the brusbsn screen, select the port number assigned to the Brother
Maintenance USB Printer. If the port number is unknown, follow steps below.
1) Click Start | Settings | Printers.