76
10
Sending a Network Fax with BFP
From the application you wish to send the document from
select File/Print. Ensure that the Brother Internet Fax
Driver is selected as shown below.
Click OK to start the BFP dialogue box. From this dialogue
box you can either specify an address in the address line
or select a location from the address book. If you wish to
type more than one location in the address line make sure
they are separated by “;”.
Note
When entering a Fax Contact you must first specify the Internet Address of the machine that will send the
document followed by the fax number as shown below.
Mailmfc9650@brother.co.uk(fax#2537)
To Next Page
Loading...
