To Next PageTo Next Page
Why does my Brother All in One Printer show 'Wrong Paper Size'?
If your Brother All in One Printer displays 'Wrong Paper Size', it means that the machine cannot find paper of the same size in another tray when the paper tray in use has run out of paper during a copy operation. Load the paper in the paper tray shown on the LCD.
What does 'Protected Device' mean on Brother All in One Printer?
If your Brother All in One Printer displays 'Protected Device', it means the protect switch on the USB Flash memory drive is enabled. Turn off the protect switch on the USB Flash memory drive.
Why does my Brother All in One Printer say 'Access Denied'?
If your Brother All in One Printer displays 'Access Denied', it means the function you're trying to use is restricted by Secure Function Lock 2.0. Contact your administrator to check your Secure Function Lock settings.
What does 'Unusable Device' mean on Brother All in One Printer?
If your Brother All in One Printer displays 'Unusable Device', it indicates that a defective or high power consumption USB device is connected, or an encrypted/unsupported USB device is connected to the USB direct interface. Unplug the device from the USB direct interface. Turn the machine off and then on again. If the problem persists, unplug the device from the USB direct interface.
What does 'Drum Stop' mean on Brother All in One Printer?
If your Brother All in One Printer displays 'Drum Stop', it means it's time to replace the drum unit. Replace the drum unit.
How to fix Brother Printer when wireless network setup configuration cannot be completed?
If you cannot complete the wireless network setup configuration on your Brother Printer, here are a few things to try: First, turn your wireless router off and then back on, and try configuring the wireless settings again. Second, double-check and make sure you're choosing the correct security settings. You might find these settings on your WLAN access point/router or by contacting your Internet provider or network administrator. Third, confirm that the MAC address of your Brother machine is allowed in the filter; you can usually find this on the printer's control panel. Also, make sure you're typing the correct SSID name or Network Key manually. Lastly, try using the Network Connection Repair Tool.
What does 'Scan Unable XX' mean on Brother All in One Printer?
The error message 'Scan Unable XX' on your Brother All in One Printer indicates that the machine has a mechanical problem or that the document is too long for duplex scanning. Turn the power off, and then turn it back on again. If the problem persists, contact Brother Customer Service. If you are scanning a document, press Stop/Exit and use a suitable size of paper for duplex scanning.
Why does my Brother All in One Printer say 'Cooling Down'?
If your Brother All in One Printer displays 'Cooling Down', it means the drum unit or toner cartridge is too hot, causing the machine to pause and cool down. Check that the fan inside the printer is running and the exhaust outlet is not blocked. If the fan is working, clear any obstructions around the outlet and allow the printer to remain on but unused for several minutes. If the fan isn't running, disconnect the printer from power for a few minutes, then reconnect it.
What to do if my Brother All in One Printer says 'Cover is Open'?
If your Brother All in One Printer displays a 'Cover is Open' message, it means that one of the covers is not completely closed. Ensure the front cover is fully closed. Also, check that the ADF cover is completely closed. If you are loading a document in the ADF, make sure the ADF cover is closed and then press Stop/Exit. Finally, verify that the fuser cover is completely closed and that no paper is jammed in the back of the machine; if there was a paper jam, remove it before closing the fuser cover and pressing Start.
How to fix a 'Cartridge Error' on my Brother All in One Printer?
If your Brother All in One Printer displays a 'Cartridge Error', it might be due to incorrect installation of the toner cartridge. To resolve this, pull out the drum unit and toner cartridge assembly. Remove the toner cartridge and reinsert it into the drum unit. Then, put the drum unit and toner cartridge assembly back into the machine.
General| Print technology | Laser |
|---|---|
| Maximum resolution | 1200 x 1200 DPI |
| Economical printing | Yes |
| Duplex printing mode | Auto |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 36 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 9 ppm |
| PictBridge | No |
| Scan speed | 2.68 sec/page |
| Dimensions (WxDxH) | 405 x 415 x 423 mm |
| All-in-one functions | Copy, Print, Scan |
| Color all-in-one functions | Scan |
| Maximum duty cycle | - pages per month |
| Recommended duty cycle | 500 - 3500 pages per month |
| Page description languages | BR-Script 3, Epson FX, IBM ProPrinter, PCL 6 |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 1200 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4, 9, 16, 25 |
| Time to first copy (black, normal) | 10.5 s |
| Copy speed (black, normal quality, A4) | 36 cpm |
| Scan to | E-mail, File, FTP, Image, OCR, USB |
| Scan drivers | ICA, ISIS, TWAIN |
| Scanner type | Flatbed & ADF scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Maximum scan area | Legal (216 x 356) mm |
| Output color depth | 24 bit |
| Image formats supported | BMP, JPG |
| Maximum scan resolution | 19200 x 19200 DPI |
| Document formats supported | |
| Paper input type | Paper tray |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 850 sheets |
| Total number of input trays | 1 |
| Maximum number of input trays | 2 |
| Multi-Purpose tray input capacity | 50 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Custom media width | 76.2 - 215.9 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 127 - 355.6 mm |
| Paper tray media types | Bond paper, Plain paper, Pre-Printed, Recycled paper, Thin paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Legal |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Auto Document Feeder (ADF) media weight | 64 - 90 g/m² |
| Display | LCD |
| Market positioning | Business |
| Display number of lines | 5 lines |
| Display number of characters | 22 |
| Standard interfaces | Ethernet, USB 2.0 |
| Security algorithms | 128-bit WEP, 64-bit WEP, 802.1x RADIUS, EAP, EAP-TLS, MD5, PEAP, TKIP, WPA-AES, WPA-PSK, WPA2-PSK |
| Internal memory | 64 MB |
| Processor family | Star Sapphire |
| Maximum internal memory | 320 MB |
| Sound power level (standby) | 37 dB |
| Sound pressure level (printing) | 59 dB |
| Sound pressure level (quiet mode) | 54 dB |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 1.2 W |
| Power consumption (standby) | 8.1 W |
| Power consumption (PowerSave) | 336 W |
| Power consumption (average operating) | 651 W |
| Package weight | 19.700 g |
| Sustainability certificates | ENERGY STAR |
Explains how to operate the machine's control panel functions.
Details the different printer emulation modes supported by the machine.
Guides on how to reset printer settings to factory defaults.
Information on installing and using the Brother printer driver software.
Steps for printing a document and guidelines for duplex printing.
Overview of customizable settings within the printer driver (Basic, Advanced, etc.).
Instructions for scanning documents using TWAIN and WIA drivers.
Features and usage of the document management software for scanning.
Introduction to ControlCenter4 and its Home/Advanced modes.
Configuring scan settings for image, OCR, E-mail, and file output.
Configuring PC-FAX and managing device settings like remote setup.
Printing and duplexing features, driver options, and faxing for Macintosh.
Specific features of the BR-Script3 printer driver on Macintosh.
Scanning documents using the TWAIN driver on Macintosh.
Scanning documents using the WIA driver on Macintosh.
Overview and functions of ControlCenter2 for Macintosh users.
Instructions for scanning documents directly to a USB Flash drive.
Configuring and performing scans over a network using various protocols.
