Brother DCP-8250DN

30
Replacing periodic
maintenance parts A
The periodic maintenance parts will need to
be replaced regularly to maintain the print
quality. The parts listed below will have to be
replaced after printing approximately 50,000
pages
1
for PF Kit MP and 100,000 pages
1
for PF Kit 1, PF Kit 2
2
, Fuser and Laser.
Please call Brother Customer Service when
the following messages appear on the LCD.
1
A4 or Letter size single-sided pages.
2
When Tray 2 is installed.
LCD message Description
Replace Parts
Fuser Unit
Replace the fuser unit.
Replace Parts
Laser Unit
Replace the laser unit.
Replace Parts
PF Kit 1
Replace the paper feeding
kit for the paper tray.
Replace Parts
PF Kit 2
2
Replace the paper feeding
kit for the lower tray
(option).
Replace Parts
PF Kit MP
Replace the paper feeding
kit for the multi-purpose
tray.