Brother DCP-8250DN - Quiet Mode Feature; Quiet Mode; LCD Screen; Setting the Backlight Brightness

Chapter 1
4
Quiet mode feature 1
Quiet mode 1
The Quiet mode setting can reduce noise
while printing. When Quiet Mode is turned On,
the print speed becomes slower. The default
setting is Off.
a Press Menu.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display Quiet Mode.
Press Quiet Mode.
d Press On or Off.
e Press Stop/Exit.
LCD screen 1
Setting the backlight
brightness 1
You can adjust the brightness of the LCD
backlight. If you are having difficulty reading
the LCD, try changing the brightness setting.
a Press Menu.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display LCD Settings.
Press LCD Settings.
d Press Backlight.
e Press Light, Med or Dark.
f Press Stop/Exit.
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a Press Menu.
b Press a or b to display
General Setup.
Press General Setup.
c Press a or b to display LCD Settings.
Press LCD Settings.
d Press Dim Timer.
e Press 10 Secs, 20 Secs, 30 Secs or
Off.
f Press Stop/Exit.