Troubleshooting
135
B
c Pull the blue tabs (1) at the left and right
sides down to release the fuser
cover (2).
If the envelope levers (3) inside the back
cover are pulled down to the envelope
position, lift these levers to the original
position before pulling the blue tabs (1)
down.
d Use both hands to gently pull the
jammed paper out of the fuser unit.
e Close the fuser cover (2).
If you print on envelopes, pull down the
envelope levers (3) to the envelope
position again before closing the back
cover.
f Close the back cover.
To Next Page
Loading...
Need help?
General
