Chapter 1
18
Set the date and time 1
The Touchscreen displays the date and time.
You can also add the current date and time to
each fax you send by setting your Station ID
(see Enter personal information (Station ID)
on page 18).
a Press .
b Press .
c Press Date.
d Enter the last two digits of the year using
the numbers on the Touchscreen, and
then press OK.
(e.g., Enter 1, 4 for 2014.)
e Enter the two digits for the month using
the numbers on the Touchscreen, and
then press OK.
f Enter the two digits for the day using the
numbers on the Touchscreen, and then
press OK.
g Press Time.
h Enter the time in 24-hour format using
the numbers on the Touchscreen, and
then press OK.
i Press .
Enter personal
information
(Station ID)
1
Set the machine's Station ID if you want the
date and time to appear on each fax you
send.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Initial Setup.
Press Initial Setup.
d Swipe up or down, or press a or b to
display Station ID.
Press Station ID.
e Press Fax.
f Enter your fax number (up to 20 digits)
using the numbers on the Touchscreen,
and then press OK.
g Press Tel.
h Enter your telephone number (up to 20
digits) using the numbers on the
Touchscreen, and then press OK. If your
telephone number and fax number are
the same, enter the same number
again.
i Press Name.
j Use the Touchscreen to enter your
name (up to 10 characters for Chinese
or 20 characters for alphanumeric), and
then press OK.
To Next Page
Loading...
Need help?
General
