EasyManuals Logo

Brother DCP-L8400DN User Manual

Brother DCP-L8400DN
259 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #154 background imageLoading...
Page #154 background image
144
Cannot receive a fax.
(continued)
Make sure the machine is in the correct Receive Mode. This is determined by the
external devices and telephone subscriber services you have on the same line as
the Brother machine (see Receive Mode settings on page 44).
If you have a dedicated fax line and want your Brother machine to
automatically answer all incoming faxes, you should select Fax mode.
If your Brother machine shares a line with an external answering machine, you
should select the External TAD mode. In External TAD mode, your
Brother machine will automatically receive incoming faxes and voice callers
will be able to leave a message on your answering machine.
If your Brother machine shares a line with other telephones and you want it to
automatically answer all incoming faxes, you should select the Fax/Tel
mode. In Fax/Tel mode, your Brother machine will automatically receive
faxes and produce a fast double-ring to alert you to answer voice calls.
If you do not want your Brother machine to automatically answer any incoming
faxes, you should select the Manual mode. In Manual mode, you must
answer every incoming call and activate the machine to receive faxes.
Another device or service at your location may be answering the call before your
Brother machine answers. To test this, lower the ring delay setting:
If the answer mode is set to Fax or Fax/Tel, reduce the ring delay to 1 ring
(see Ring Delay on page 44).
If the answer mode is set to External TAD, reduce the number of rings
programmed on your answering machine to two.
If the answer mode is set to Manual, DO NOT adjust the ring delay setting.
Have someone send you a test fax:
If you received the test fax successfully, your machine is operating correctly.
Remember to reset your ring delay or answering machine setting back to your
original setting. If receiving problems recur after resetting the ring delay, then
a person, device, or subscriber service is answering the fax call before the
machine has a chance to answer.
If you were not able to receive the fax, then another device or subscriber
service may be interfering with your fax reception or there may be a problem
with your fax line.
Receiving Faxes (continued)
Difficulty Suggestions

Table of Contents

Other manuals for Brother DCP-L8400DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-L8400DN and is the answer not in the manual?

Brother DCP-L8400DN Specifications

General IconGeneral
BrandBrother
ModelDCP-L8400DN
CategoryAll in One Printer
LanguageEnglish

Related product manuals