Brother DCP-L8400DN User Manual

184
Network
(continued)
E-mail/IFAX
(Supported
only after
IFAX is
downloaded)
(continued)
Setup
Server
(continued)
POP3/IMAP4 Protocol POP3*
IMAP4
Choose POP3 or
IMAP4 for receiving
E-mails.
Server [000-255].
[000-255].
[000-255].
[000-255]
Name
Enter POP3 or
IMAP4 server
address, or name
(up to 64
characters).
Port 110*
[1-65535]
Enter POP3 or
IMAP4 port
number.
Mailbox
Name
— Enter the mail box
name (up to 60
characters).
Mailbox
Password
— Enter the password
to log in to the
POP3 or IMAP4
server (up to 32
characters).
Select
Folder
Default(Inbox) *
Specified
Choose the mail
folder. If you
choose
Specified, enter
the folder name (up
to 60 characters).
SSL/TLS None*
SSL
TLS
You can send or
receive an E-mail
via an E-mail server
that requires secure
SSL/TLS
communication.
Verify
Cert.
On
Off*
Verify the POP3 or
IMAP4 Server
Certificate
automatically.
APOP On
Off*
Enable or disable
APOP.
Setup Mail
RX
Auto
Polling
Auto
Polling
On*
Off
Automatically check
the server for new
messages.
Poll
Frequency
(When Auto
Polling
is set to On.)
1Min
3Mins
5Mins
10Mins*
30Mins
60Mins
Set the interval for
checking for new
messages on the
server.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions
Software and Network User's Guide
The factory settings are shown in Bold with an asterisk.

Brother DCP-L8400DN Specifications

General

Brand	Brother
Model	DCP-L8400DN
Category	All in One Printer
Language	English