Chapter 2
22
b While pressing the blue paper-guide
release levers (1), slide the paper
guides to fit the paper you are loading in
the tray. Make sure the guides are firmly
in the slots.
c Fan the stack of paper well to avoid
paper jams and misfeeds.
d Load paper in the tray and make sure:
The paper is below the maximum
paper mark ( ) (1), as overfilling
the paper tray will cause paper jams.
The side to be printed on is face down.
The paper guides touch the sides of
the paper so it will feed correctly.
e Put the paper tray firmly back in the
machine. Make sure the tray is
completely inserted into the machine.
To Next Page
Loading...
Need help?
General
