Chapter 2
24
c Load paper in the MP tray and make
sure:
The paper stays under the maximum
paper tab (1).
The top edge of the paper is
positioned between the and
arrows (2).
The side to be printed on must be
face up with the leading edge (top of
the paper) in first.
The paper guides touch the sides of
the paper so it will feed correctly.
When you are using glossy paper, put only
one sheet at a time in the MP tray to avoid
a paper jam.
d Lift up the support flap to prevent paper
from sliding off the face-down output
tray, or remove each page as soon as it
comes out of the machine.
e Send the print job to the machine.
2
1
To Next Page
Loading...
Need help?
General
