Confidential
Appendix 4. Firmware Switches (WSW)
This appendix describes the functions of the firmware switches, which can be divided into two
groups: one is for customizing preferences designed for the shipping destination (as described in
Appendix 3) and the other is for modifying preferences that match the machine to the
environmental conditions. Use the latter group if the machine malfunctions due to mismatching.
NOTE: Each of the firmware switches has eight selectors. You should not allow end users to
access all of those selectors, but you can allow them to access user-accessible selectors which are
shaded
in the firmware switch tables in this appendix.
NOTE: The firmware switch setting procedure is given in Chapter 9, Section 9.4.5 (Function
code 10).
To Next Page
Loading...
