4-3 Confidential
Error Message Cause Action
(On color LCD) *
Unable to Change XX
Unable to Clean XX
Unable to Init XX
Unable to Print XX
Unable to Scan XX
(On monochrome LCD) *
Change Unable XX
Clean Unable XX
Init Unable XX
Print Unable XX
Scan Unable XX
The machine has a
mechanical problem.
or
A foreign object such as a
clip or ripped paper is in
the machine.
Open the scanner cover and remove
any foreign objects inside the machine.
If the error message continues,
disconnect the machine from the
electrical outlet, wait several minutes,
then reconnect it.
Wrong Paper Size Paper is not the correct
size.
Load the correct size of paper (Letter,
Legal or A4), and then press Black
Start (Mono Start) or Color Start.
Wrong USB Device The machine has been
overloaded due to a wrong
or broken device plugged
in the PictBridge direct
print slot.
Unplug the USB cable from the
PictBridge direct print slot. Turn the
machine off and then on.
If this message appears even with a
PictBridge compatible digital camera
being connected, the USB setting on
the camera may not be PictBridge
compatible. Check the setting.
* XX represents one of the error codes shown in "[ 2 ] Error codes contained in "MACHINE ERROR X
X
" messages."
To Next Page
Loading...
