v
Justification The way in which text is aligned. For example, left justification involves aligning
the left end of every line of text.
Label A text string that forms part of an HP-GL and HP-GL/2 plot.
Landscape The orientation in which the top edge of the page is longer than the side edges.
Logical page The area of the physical page on which the cursor can be positioned in LaserJet
mode. You can use PCL commands to specify the position of the logical page on
the physical page. Also known as the PCL addressable area.
LSB i) The least significant byte of a set of data bytes.
ii) The least significant bit of a single byte of data.
Macro A sequence of PCL commands that can be stored in the printer memory. To run
the sequence you need only use a single PCL command.
Macro execution Executing a macro is a way of running a macro whereby any changes made to the
modified print environment by the macro are retained when macro execution has
been completed.
Macro overlay environment Used only by a macro that has been enabled for overlay. A combination of the user
default environment and the modified print environment.
Medium The line thickness of normal type.
Modified print environment The collection of all current LaserJet printer settings. This environment is saved if
you call a macro or enter HP-GL and HP-GL/2 mode, it is restored when the
macro has finished running or when you quit HP-GL or HP-GL/2 mode.
Monospacing Some bitmap fonts are printed with each character occupying the same space on a
line of text. This is known as monospacing.
MSB i) The most significant byte of a set of data bytes.
ii) The most significant bit of a single byte of data.
Pattern i) The hatching or cross-hatching that can be applied to an outline shape.
ii) The non-white areas of the source image in the LaserJet print model.
Pattern transparency The patterned ( non-white ) areas of the source image are either transparent, in
which case the destination image is visible through the white parts of the pattern,
or opaque, in which case the destination image is not visible at all throughout the
patterned areas of the source image.
PCL Printer Control Language. The language consisting of escape sequences that is
used to control the printer in LaserJet mode
PCL addressable area See logical page.
PCL picture frame See picture frame.
Pen Although this printer is a laser printer the HP-GL/2 and HP-GL graphics languages
retains the notion of a pen and allows you to select between two pens, white and
black. You must select a pen before you can draw anything. The HP-GL and HP-
GL/2 language were originally developed for use with plotters and the terminology
remains.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
