Brother HL-5450DN Technical Reference Guide

CHAPTER 6 EPSON - 9
6. COMMANDS
6.1. Basic printer operations
The most common printer operations are described in this section. Some are invoked using control codes
alone - the rest require escape sequences. For the sake of completeness, several instructions which are
part of the Epson FX-850 mode instruction sets, but which an HL Series printer ignores are included.
Null
NUL (0) <00h>
NUL (ASCII code 0) is ignored.
Bell
BEL (7) <07h>
BEL (ASCII code 7) is ignored.
Space
SP (32) <20h>
The SP control code (ASCII code 32) moves the current print position one space to the right.
LPRINT CHR$(32); 'Print a space
Backspace
BS (08) <08h>
 The BS control code (ASCII code 8) moves the current print position one space to the left.
 This code is only effective when used with left justification, which is the default justification mode.
LPRINT CHR$(8); 'Backspace
Carriage return
CR (13) <0Dh>
 The CR control code (ASCII 13) moves the print position to the left margin on the current line.
 If automatic line feed is on, this code moves the current print position to the left margin on the next line. On
some printers you can turn on automatic line feed using the control panel switches.
LPRINT CHR$(13); 'Carriage return
Line feed
LF (10) <0Ah>
 The LF control code (ASCII code 10) moves the current print position down one line, using the current line
space setting.
 This code does not cause a carriage return to be performed.
 If the print position is such that this operation would move it below the bottom margin, the current page is
ejected and the print position is moved to the top of the next page instead.
Form feed
FF (12) <0Ch>
 The FF control code (ASCII code 12) ejects the current page and moves the current print position to the top
of the next page, unless the current page is blank.
 This code does not cause a carriage return to be performed, hence the print position does not change
horizontally.
 If the current page is blank this control code has no effect.
LPRINT CHR$(12); 'Form feed

Brother HL-5450DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Duplex printing	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	38 ppm
Duplex print speed (black, normal quality, A4/US Letter)	9 ppm
Maximum duty cycle	- pages per month
Recommended duty cycle	1000 - 3500 pages per month
Number of print cartridges	1
Memory type	DDR2
Processor family	Star Sapphire
Maximum internal memory	320 MB
Sound power level (standby)	34 dB
Sound pressure level (printing)	59 dB
Sound pressure level (quiet mode)	54 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	800 sheets
Total number of input trays	2
Multi-Purpose tray input capacity	50 sheets
Custom media width	76.2 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	127 - 355.6 mm
Paper tray media types	Plain paper, Recycled paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.41 W
Power consumption (standby)	4.7 W
Power consumption (printing)	665 W
Power consumption (PowerSave)	0.6 W
Package weight	11.900 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	371 x 384 x 245 mm