Brother HL-5450DN Technical Reference Guide

CHAPTER 6 EPSON - 10
Set inter-character space
EscSPn (27)(32)n <1Bh><20h>n
 This command allows you to set the space between successive characters.
 n is the space between characters in multiples of 1/120".
 n must be in the range 0 to 127.
LPRINT CHR$(27); CHR$(32); CHR$(5); 'Set 1/24" char space
Select justification mode
Escan (27)(97)n <1Bh><61h>n
 This command allows you to select the justification mode for subsequent text.
 Set n to 0 to select left justification.
 Set n to 1 to centre subsequent text.
 Set n to 2 to select right justification.
 Set n to 3 to select full justification (text will be both left and right justified).
 The default justification mode is left justification.
 The horizontal tab, HT, and backspace, BS, control codes can only be used in left justification mode.
LPRINT CHR$(27); CHR$(97); CHR$(2); 'Right justify text
Set absolute print position
Esc$n1n2 (27)(36)n1n2 <1Bh><24h>n1n2
 This command allows you to print characters a specified distance in from the left margin.
 The unit of movement is 1/60".
 The specified distance to be moved is n
1
+(n
2
*256)/120".
 If the specified position is to the right of the right margin the command is ignored.
LPRINT CHR$(27); CHR$(36); CHR$(120); CHR$(0); 'Print a line 2" in
Set relative print position
Esc\n1n2 (27)(92)n1n2 <1Bh><5Ch>n1n2
 This command allows you to print characters a specified distance to the left or right of the current print
position.
 The unit of movement is 1/120".
 If you wish to move the print position to the right, the distance the print position is to be moved is calculated
as (n
1
+(n
2
*256))/120".
 If you wish to move the print position to the left, the distance the print position is to be moved is calculated
as (65536 – (n
1
+(n
2
*256)))/120".
 If the specified position is beyond the left or right margin the command is ignored.
LPRINT CHR$(27); CHR$(36); CHR$(180); CHR$(0); 'Print a line 1.5" to
the right
Select unidirectional printing
Esc< (27)(60) <1Bh><3Ch>
This command has no effect.
Select / cancel unidirectional printing
EscU (27)(85) <1Bh><55h>
This command has no effect.

Brother HL-5450DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Duplex printing	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	38 ppm
Duplex print speed (black, normal quality, A4/US Letter)	9 ppm
Maximum duty cycle	- pages per month
Recommended duty cycle	1000 - 3500 pages per month
Number of print cartridges	1
Memory type	DDR2
Processor family	Star Sapphire
Maximum internal memory	320 MB
Sound power level (standby)	34 dB
Sound pressure level (printing)	59 dB
Sound pressure level (quiet mode)	54 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	800 sheets
Total number of input trays	2
Multi-Purpose tray input capacity	50 sheets
Custom media width	76.2 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	127 - 355.6 mm
Paper tray media types	Plain paper, Recycled paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.41 W
Power consumption (standby)	4.7 W
Power consumption (printing)	665 W
Power consumption (PowerSave)	0.6 W
Package weight	11.900 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	371 x 384 x 245 mm