EasyManuals Logo

Brother HL-5450DN Technical Reference Guide

Brother HL-5450DN
517 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
CHAPTER 2 PCL - 29
4.1.11. Reset to factory default settings
EscCRFD (27)(13)(70)(68) <1Bh><0Dh><46h><44h>
This command causes a factory reset to be performed, restoring all the printer's factory default settings. See
the section "Factory default environment" for a list of the factory default settings.
You can also perform a factory reset using the printer's control panel or remote printer console program (see
the User Guide).
4.1.12. Reset to user settings
EscCR!#R (27)(13)(33)#(82) <1Bh><0Dh><21h>#<52h>
# can be 0, 1 or 2.
#0 indicates the current settings are restored. Unlike the Esc E reset command, the Esc CR!0R command
resets the input buffer.
#1 indicates the user settings 1 are restored, if the printer supports multi user settings.
#2 indicates the user settings 2 are restored, if the printer supports multi user settings (Except for HL-7050).
Depending on the model, you may be able to lock the control panel settings ("SETTING LOCK=ON"). In
that case, parameters 1 and 2 are ignored.
4.1.13. Printer self test
Escz (27)(122) <1Bh><7Ah>
A printer self test causes a test sheet to be printed out to show that the machine is working properly. Depending
on the model, you may also see the test pattern for HRC setting.
4.1.14. Exit current emulation mode
Esc%-12345X (27)(37)(45)(49)(50)(51)(52)(53)(88)
<1Bh><25h><2Dh><31h><32h><33h><34h><35h><58h>
When the printer receives this command, all page data already received is printed out.
All settings are reset to the user settings.
Exits the current emulation mode.
4.1.15. Change emulation mode
EscCRGL (27)(13)(71)(76) <1Bh><0Dh><47h><4Ch>
This command changes the emulation mode to HP-GL mode.
EscCRAB (27)(13)(65)(66) <1Bh><0Dh><41h><42h>
This command changes the emulation mode to BR-Script Batch mode.
EscCRAI (27)(13)(65)(73) <1Bh><0Dh><41h><49h>
This command changes the emulation mode to BR-Script Interactive mode.
EscCRI (27)(13)(73) <1Bh><0Dh><49h>
This command changes the emulation mode to IBM Proprinter XL mode.
EscCRE (27)(13)(69) <1Bh><0Dh><45h>
This command changes the emulation mode to Epson FX-850 mode.
Depending on the model, you can also switch between emulation modes using the printer's control panel (see
the User Guide).
PR2000070

Table of Contents

Other manuals for Brother HL-5450DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother HL-5450DN and is the answer not in the manual?

Brother HL-5450DN Specifications

General IconGeneral
ColorNo
N-up printing2, 4, 9, 16, 25
Duplex printingYes
Print technologyLaser
Maximum resolution2400 x 600 DPI
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)38 ppm
Duplex print speed (black, normal quality, A4/US Letter)9 ppm
Maximum duty cycle- pages per month
Recommended duty cycle1000 - 3500 pages per month
Number of print cartridges1
Memory typeDDR2
Processor familyStar Sapphire
Maximum internal memory320 MB
Sound power level (standby)34 dB
Sound pressure level (printing)59 dB
Sound pressure level (quiet mode)54 dB
Total input capacity250 sheets
Total output capacity150 sheets
Maximum input capacity800 sheets
Total number of input trays2
Multi-Purpose tray input capacity50 sheets
Custom media width76.2 - 215.9 mm
Maximum print size216 x 356 mm
Custom media length127 - 355.6 mm
Paper tray media typesPlain paper, Recycled paper
Paper tray media weight60 - 105 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Multi-purpose tray media typesBond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Standard interfacesEthernet, USB 2.0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.41 W
Power consumption (standby)4.7 W
Power consumption (printing)665 W
Power consumption (PowerSave)0.6 W
Package weight11.900 g
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)371 x 384 x 245 mm

Related product manuals