Brother HL-5450DN Technical Reference Guide

CHAPTER 2 PCL - 100
6.5. The Picture Frame
The PCL picture frame is the rectangular area of the page on which you can print graphic images. You can
position and size the picture frame to suit your requirements and achieve effects such as scaling or distortion of
vector graphics images.
6.5.1. The default picture frame
The default picture frame size and position is determined by the default logical page size and text length for
each given paper size.
6.5.2. Set picture frame anchor point
Esc*c0T (27)(42)(99)(48)(84) <1Bh><2Ah><63h><30h><54h>

This command sets the anchor point (top left hand corner) of the picture frame to the current cursor position.
6.5.3. Set picture frame vertical size
Esc*c#Y (27)(42)(99)#(89) <1Bh><2Ah><63h>#<59h>

This command sets the vertical size of the picture frame.
 # is the height of the picture frame in decipoints.
6.5.4. Set picture frame horizontal size
Esc*c#X (27)(42)(99)#(88) <1Bh><2Ah><63h>#<58h>

This command sets the horizontal size of the picture frame.
 # is the width of the picture frame in decipoints.
6.5.5. Specify vertical plot size
Esc*c#L (27)(42)(99)#(76) <1Bh><2Ah><63h>#<4Ch>

This command specifies the height in inches of an imported image.
 # is the height of the image in inches.
 # can be in the range 0 to 32767 and can have up to four places of decimals.
 This command is only applicable to existing graphic images which are being imported from an application.

The imported graphic will be scaled so that its height matches that of the HP-GL/2 graphics window.
6.5.6. Specify horizontal plot size
Esc*c#K (27)(42)(99)#(75) <1Bh><2Ah><63h>#<4Bh>

This command specifies the width in inches of the image being imported.
 # is the width of the image in inches.
 # can be in the range 0 to 32767 and can have up to four places of decimals.
 This command is only applicable to existing graphic images which are being imported from an application.
 The imported graphic will be scaled so that its width matches that of the HP-GL/2 graphics window.

Brother HL-5450DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Duplex printing	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	38 ppm
Duplex print speed (black, normal quality, A4/US Letter)	9 ppm
Maximum duty cycle	- pages per month
Recommended duty cycle	1000 - 3500 pages per month
Number of print cartridges	1
Memory type	DDR2
Processor family	Star Sapphire
Maximum internal memory	320 MB
Sound power level (standby)	34 dB
Sound pressure level (printing)	59 dB
Sound pressure level (quiet mode)	54 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	800 sheets
Total number of input trays	2
Multi-Purpose tray input capacity	50 sheets
Custom media width	76.2 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	127 - 355.6 mm
Paper tray media types	Plain paper, Recycled paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.41 W
Power consumption (standby)	4.7 W
Power consumption (printing)	665 W
Power consumption (PowerSave)	0.6 W
Package weight	11.900 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	371 x 384 x 245 mm