Brother HL-5450DN Technical Reference Guide

CHAPTER 3 PCL5C - 6
[Example]
If you want to send index No. 7,6,5,4,3,2,1,0;
Enter 'ESC*v6W 00h 00h 04h 08h 08h 08h', then select Send Index No by Plane.
Select 4 bits/index. (2
4
= 16 Palettes)
ESC*r1A Start Raster Transfer
ESC*b1V 10101010B Send Plane1 data (The Index No Bit0 data)
ESC*b1V 11001100B Send Plane2 data (The Index No Bit1 data)
ESC*b1V 11110000B Send Plane3 data (The Index No Bit2 data)
ESC*b1W 00000000B Send Plane4 data (The Index No Bit3 data)
....
ESC*rC End Raster Transfer
(xxh: hexadecimal, xxxxxxxxB: binary)
Send Index No by Pixel (= 1)
 This mode sends the index No. by pixel.
 Bits/index must be 1, 2, 4, 8.
(2 bits/index)
ESC*b#W d1, d2, d1, d2, d1, d2... 1st raster
ESC*b#W d1, d2, d1, d2, d1, d2... 2nd raster
ESC*b#W d1, d2, d1, d2, d1, d2... 3rd raster
ESC*b#W d1, d2, d1, d2, d1, d2... 4th raster
MSB LSB
Index No.
d2 d1
** The Italic characters shown above are the index No. at the 2nd pixel in the 3rd raster.
[Example]
If you want to send the index No. below;
Index No.
3, 2, 1, 0 (1st raster)
2, 1, 0, 3 (2nd raster)
3, 0, 1, 2 (3rd raster)
0, 1, 2, 3 (4th raster)
Enter 'ESC*v6W 00h 01h 02h 08h 08h 08h', then select Send Index No by Plane.
Select 2 bits/index. (2
2
= 4 Palettes)
ESC*r1A Start Raster Transfer
ESC*b1V 11100100B Send 1st raster data
ESC*b1V 10010011B Send 2nd raster data
ESC*b1V 11000110B Send 3rd raster data
ESC*b1W 00011011B Send 4th raster data
....
ESC*rC End Raster Transfer
(xxh: hexadecimal, xxxxxxxxB: binary)
Send Direct Value by Plane (= 2)
 This mode sends each value of RGB by plane.
 Bits/index must be 1.
 This mode sends the plane data except the last one using the Send Raster Data by Plane command.
 This mode sends the last plane data using the Send Raster Data command.

Brother HL-5450DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Duplex printing	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	38 ppm
Duplex print speed (black, normal quality, A4/US Letter)	9 ppm
Maximum duty cycle	- pages per month
Recommended duty cycle	1000 - 3500 pages per month
Number of print cartridges	1
Memory type	DDR2
Processor family	Star Sapphire
Maximum internal memory	320 MB
Sound power level (standby)	34 dB
Sound pressure level (printing)	59 dB
Sound pressure level (quiet mode)	54 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	800 sheets
Total number of input trays	2
Multi-Purpose tray input capacity	50 sheets
Custom media width	76.2 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	127 - 355.6 mm
Paper tray media types	Plain paper, Recycled paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.41 W
Power consumption (standby)	4.7 W
Power consumption (printing)	665 W
Power consumption (PowerSave)	0.6 W
Package weight	11.900 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	371 x 384 x 245 mm