Brother HL-5450DN Technical Reference Guide

CHAPTER 6 EPSON - 20
Select italic mode
Esc4 (27)(52) <1Bh><34h>
 This command enables the italic printing mode. Subsequent text is printed in italic style.
 You can still use italic text even after selecting the extended character set with the Esc t command.
LPRINT CHR$(27); CHR$(52); 'Italic mode
Cancel italic mode
Esc5 (27)(53) <1Bh><35h>
This command cancels the italic printing mode. Subsequent text is printed upright.
LPRINT CHR$(27); CHR$(53); 'Cancel italic mode
Select superscript / subscript mode
EscSn (27)(83)n <1Bh><53h>n
 This command allows you to print superscripts or subscripts.
 Set n to 0 to print subsequent text using superscript characters.
 Set n to 1 to print subsequent text using subscript characters.
 When you specify the value for n you may use the character codes for '0' and '1' (48 and 49) instead of 0 and
1.
 Selecting either superscript or subscript mode cancels double-height printing mode.
 You can cancel either superscript or subscript mode with the Esc T command.
LPRINT CHR$(27); CHR$(83); CHR$(0); 'Turn on superscript mode
Cancel superscript / subscript mode
EscT (27)(84) <1Bh><54h>
 This command cancels superscript or subscript printing mode.
 Subsequent text is printed using normal characters.
LPRINT CHR$(27); CHR$(84); 'Turn off superscript mode
Select / cancel double-height printing
Escwn (27)(119)n <1Bh><77h>n
 This command turns double-height printing on or off.
 If n is set to 1 subsequent text is printed using double-height characters. The line space setting is doubled.
 If n is set to 0 subsequent text is printed using normal sized characters. The previous line spacing is restored.
 When you specify a value for n you may also use the character codes for '0' and '1' (48 and 49) instead of 0
and 1.
 You cannot use superscript, subscript or condensed printing modes in conjunction with double-height
printing. If you try to select any of these three modes while in double-height printing the command will be
ignored.
LPRINT CHR$(27); CHR$(119); CHR$(1); 'Set double-height printing mode
Select / cancel underline mode
Esc–n (27)(45)n <1B><2D>n
 This command turns character underlining on or off.
 If n is set to 1 subsequent text is printed underlined. All characters, including space characters, are
underlined with a continuous line.
 Horizontal tabbed spaces are never underlined.
 If n is set to 0 subsequent text is not underlined.
 When you specify a value for n you may also use the character codes for '0' and '1' (48 and 49) instead of 0
and 1.
LPRINT CHR$(27); CHR$(45); CHR$(1); 'Underline following text

Brother HL-5450DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Duplex printing	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	38 ppm
Duplex print speed (black, normal quality, A4/US Letter)	9 ppm
Maximum duty cycle	- pages per month
Recommended duty cycle	1000 - 3500 pages per month
Number of print cartridges	1
Memory type	DDR2
Processor family	Star Sapphire
Maximum internal memory	320 MB
Sound power level (standby)	34 dB
Sound pressure level (printing)	59 dB
Sound pressure level (quiet mode)	54 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	800 sheets
Total number of input trays	2
Multi-Purpose tray input capacity	50 sheets
Custom media width	76.2 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	127 - 355.6 mm
Paper tray media types	Plain paper, Recycled paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.41 W
Power consumption (standby)	4.7 W
Power consumption (printing)	665 W
Power consumption (PowerSave)	0.6 W
Package weight	11.900 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	371 x 384 x 245 mm