Brother HL-5450DN Technical Reference Guide

CHAPTER 7 IBM PROPRINTER - 14
5.3. Using Characters
Select character set I
Esc7 (27)(55) <1Bh><37h>
This command selects IBM Character set I for use in subsequent printing operations.
LPRINT CHR$(27); CHR$(55); 'Select character set I
Select character set II
Esc6 (27)(56) <1Bh><36h>
This command selects IBM character set II for use in subsequent printing operations.
LPRINT CHR$(27); CHR$(54); 'Select character set II
Set pitch to 10 cpi
DC2 (18) <12h>
 This command sets the printing pitch to 10 characters per inch (cpi).
 If condensed character mode has previously been set, it is cancelled.
LPRINT CHR$(18); 'set pitch to 10 CPI
Set pitch to 12 cpi
Esc: (27)(58) <1Bh><3Ah>
This command sets the printing pitch to 12 characters per inch (cpi).
LPRINT CHR$(27); CHR$(58); 'set pitch to 12 CPI
Proportional spacing
EscPn (27)(80)n <1Bh><50h>n
 This command allows you to turn proportional spacing on or off.
 Setting n to 1 turns proportional spacing on. Subsequent text is printed proportionally spaced.
 Setting n to 0 turns proportional spacing off. Subsequent text is printed monospaced.
 If you change the character pitch using DC2, SI or Esc :, proportional spacing is automatically turned
off.
LPRINT CHR$(27); CHR$(80); CHR$(1); 'Turn proportional spacing on
Set condensed character mode
SI (15) <0Fh>
 This command selects condensed character mode. Subsequent text characters are condensed
horizontally when printed.
 The DC2 code, used to select a character pitch of 10 cpi, cancels condensed character mode.
LPRINT CHR$(15); 'Set condensed character mode
Set emphasized character mode
EscE (27)(69) <1Bh><45h>
This command turns emphasized character mode on. Subsequent text is printed with a bold stroke width.
LPRINT CHR$(27); CHR$(69); 'Turn emphasized character mode on
Cancel emphasized character mode
EscF (27)(70) <1Bh><46h>
This command turns emphasized character mode off. Subsequent text is printed with medium stroke
width.
LPRINT CHR$(27)l CHR$(70); 'Turn emphasized character mode off

Brother HL-5450DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Duplex printing	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	38 ppm
Duplex print speed (black, normal quality, A4/US Letter)	9 ppm
Maximum duty cycle	- pages per month
Recommended duty cycle	1000 - 3500 pages per month
Number of print cartridges	1
Memory type	DDR2
Processor family	Star Sapphire
Maximum internal memory	320 MB
Sound power level (standby)	34 dB
Sound pressure level (printing)	59 dB
Sound pressure level (quiet mode)	54 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	800 sheets
Total number of input trays	2
Multi-Purpose tray input capacity	50 sheets
Custom media width	76.2 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	127 - 355.6 mm
Paper tray media types	Plain paper, Recycled paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.41 W
Power consumption (standby)	4.7 W
Power consumption (printing)	665 W
Power consumption (PowerSave)	0.6 W
Package weight	11.900 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	371 x 384 x 245 mm