3-5
Confidential
FG harness of the Inlet
harness ASSY
Screw pan (S/P washer) M3.5x6 1 0.5±0.05 (5±0.5)
Inlet harness ASSY Taptite flat B M3x10 1 0.5±0.05 (5±0.5)
Drive ground plate Screw pan (S/P washer) M3.5x6 1 0.5±0.05 (5±0.5)
LVPS plate Taptite cup S M3x8 SR 2 0.5±0.05 (5±0.5)
Taptite bind B M4x12 2 0.8±0.1 (8±1)
Low-voltage power supply
PCB unit
Taptite cup S M3x6 SR 5 0.5±0.05 (5±0.5)
MP upper cover ASSY Taptite bind B M3x10 2 0.4±0.1 (4±1)
MP paper empty/
registration front sensor
PCB ASSY
Taptite bind B M3x8 1 0.4±0.1 (4±1)
Paper feed unit Taptite cup B M3x12 1 0.4±0.1 (4±1)
Taptite bind B M4x12 2 0.8±0.1 (8±1)
Registration front/
rear sensor PCB holder
Taptite bind B M3x10 1 0.5±0.1 (5±1)
MP drive frame Taptite bind B M3x10 3 0.5±0.1 (5±1)
High-voltage power
supply PCB ASSY
Taptite pan B M3x10 2 0.5±0.1 (5±1)
LT cover rear Taptite cup S M3x10 SR 2 0.8±0.1 (8±1)
LT cover left Taptite cup S M3x6 SR 2 0.8±0.1 (8±1)
LT cover right Taptite cup S M3x6 SR 2 0.8±0.1 (8±1)
LT relay PCB ASSY Taptite cup S M3x6 SR 1 0.8±0.1 (8±1)
LT beam F ASSY Taptite cup S M3x6 SR 5 0.8±0.1 (8±1)
LT solenoid holder ASSY Taptite cup S M3x6 SR 1 0.8±0.1 (8±1)
LT beam front Taptite cup S M3x6 SR 2 0.8±0.1 (8±1)
LT beam rear Taptite cup S M3x6 SR 4 0.8±0.1 (8±1)
LT frame L unit Taptite bind B M4x10 1 0.8±0.1 (8±1)
Location of screw Screw type Q' ty
Tightening torque
N
·m (kgf·cm)
To Next Page
Loading...
